Sailor 6248 VHF, Руководство по установке

Страница: 48 / 104

Entering the MMSI number
3-2 Chapter 3: First-time power up 98-132904-C
3.2 Entering the MMSI number
When the VHF radio is powered on for the first time, you must enter the vessel’s MMSI
number. Hereafter the MMSI number is briefly displayed after power up. The MMSI is a
unique, 9-digit identifier assigned to your ship.
3.2.1 Entering the MMSI number
When being prompted after power up enter the MMSI number as
described below:
1. Enter the 9 digits one by one using the keypad or by turning the
selector knob to the desired digit, press the selector knob to accept
the digit and advance to the next digit.
2. If you need to delete the previous digit press the soft key BACK .
Once programmed, the MMSI number is displayed in the DSC window directly after
start-up. The DSC functionality is operational at any time.
The message NO DSC (NO MMSI) is shown in the DSC window if the MMSI is not
programmed.
3.2.2 Changing the MMSI number
If you need to change the MMSI number of the SAILOR 6222 VHF DSC use the built-in
service tool and a connected PC, or reset the MMSI number from the Setup menu of the
radio. The manuals for the service tool and the user manual for the radio can be
downloaded from
http://extranet.thrane.com .
Important
The MMSI number must be programmed into the VHF radio to use any DSC
functionality. The radio will prompt for the MMSI number at each power-up
until the MMSI has been entered. An error message is displayed when trying to
initiate any DSC function. However, you can use the radio in normal VHF mode.
CAUTION! Without a programmed MMSI number the Distress
button will not work!
Note
The MMSI number can be programmed by the operator once. If a wrong
number has been entered and stored, or if there is a requirement to change it,
contact your authorized dealer.
No DSC Distress
Enter MMSI:
MMSI MISSING
000000000