Menu
2022/04
Operating instructions Concept PDG 2906 peristaltic dosing pump
35 / 44
Configuration of Concept 2105 additional pump
1.
Connect PC to PDG 2906-I (via WLAN or via USB interface using the Saier data transfer
adapter).
2.
Start SSC software.
3.
Select PDG 2906-I.
4.
Click on “Component pump”.
The additional pump is registered.
5.
Set flow rate of additional pump.
6.
Select operating mode parallel operation or direct operation.
Dos. P. = Parallel operation
Signal = Direct operation
7.
Save settings.
8.
Make further settings as described in Concept 2105 operating manual.
The additional pump is configured.
