SAIC MOTOR MG HS, Руководство пользователя

Страница: 230 / 319

Starting & Driving
started, and at this time, the Start-Stop system indicator
lamp on the instrument pack
extinguishes:
• The driver side seat belt is unbuckled.
• The driver door is open.
• Bonnet is open.
Note: In case of low battery, automatic engine start
may fail after sudden flame-out, in this case, please
refer to "Starter Inoperative, Serious Battery Capacity
Loss".
Battery
When charging/discharging the battery, or
starting the car with an external power
source or supplying power from the vehicle,
the negative cable must be connected to
vehicle body earth point, rather than the
battery negative. Failure to do this will result
in inaccurate battery power calculation
which will effect the automatic engine start.
DO NOT disconnect the battery sensor
unless
absolutely necessary. Removal
will result in inaccurate battery power
calculation which will effect the automatic
engine start.
Failure to operate with the following instructions will effect
the battery performance and the function of Start-Stop
intelligent fuel saving system:
1 For vehicles with Start-Stop intelligent fuel saving
system, following re-connection of the battery
negative terminal, the battery needs to be left for at
least 4 hours. Before this the automatic Start/Stop
functionality of the engine will be disabled.
2 If the vehicle is run continually for more than 100 hours
uninterrupted, the vehicle needs to be left for at least
4 hours so that the battery state signal can return to
normal state.
3 If the battery requires replacement, ALWAYS use the
battery with the same type and same specifications.
Failure to adhere to this can affect the automatic
Start/Stop function.
216