SAIC MOTOR MG HS, Руководство пользователя

Страница: 229 / 319

Starting & Driving
• Low battery or battery temperature not within the
desired range.
• The vacuum in the braking system falls below a preset
limit.
• Starter motor temperature is above a preset limit.
• Reverse gear selected or has been selected prior to
parking.
• In high-altitude zones.
• On the hill.
Automatic Engine Start
After the car is stopped, the engine will be automatically
started when detecting one of the following operations of
driver, and the Start-Stop system indicator lamp on the
instrument pack
extinguishes:
• Select D gear, and release the brake pedal.
• Depress the brake/accelerator pedal when P/N gear is
selected.
• Select D gear (R/D/S).
Note: When EPB system or Auto Hold system is
enabled, the engine will not automatically start.
Note: In individual situation, the malfunction
indicator lamp on the instrument will illuminate in the
process of automatic engine start. This occurs due to
the low voltage during startup, not indicating actual
faults. If the malfunction indicator lamp is still on for
a long time after engine start-up, seek a local MG
Authorised Repairer.
Even if the driver does not have any operation, the engine
will start automatically upon demands of the vehicle after
automatic stop:
• Front defrost is on.
• Activate the air conditioner, and the temperature inside
the vehicle does not meet the target value.
• Battery power is below a preset limit.
• The vehicle speed exceeds its limits, for example, when
slipping on slopes.
• The vacuum in the braking system falls below a preset
limit.
• The Start-Stop main switch (1) is pressed.
When one of the followings occurs after the engine is
automatically stopped, the engine can only be manually
215
4