SAIC MOTOR MG HS, Руководство пользователя

Страница: 209 / 319

Starting & Driving
Lock-mode Button
LOC
K
Press the button to enter the Lock-mode, then the
Lock-mode ON indicator illuminates green while the
instrument interface shows "4WD Lock On"; press the
button again to enter the Auto-mode, and the indicator
goes off.
In the Lock-mode, when the car speed exceeds 60km/h,
the current mode is deactivated, the indicator goes off, and
the all-wheel drive system enters Auto-mode; if the car
speed reduces below 60km/h again, the Lock-mode won't
resume.
After activating the Lock-mode, switch off the ignition.
If the ignition is switched to ON within 1 minute, the
Lock-mode will stay; if the ignition is switched again to ON
after 1 minute, the all-wheel drive system will enter the
Auto-mode.
All-Wheel Drive System Indicator Lamp
After replacement by non-full-scale spare
tyres, the all-wheel drive system indicator
lamp illuminates red when the car is moving,
and the Lock-mode can not be used. After
replacement by full-scale spare tyres again,
the indicator lamp goes off when the car is
in motion.
L O C K
The indicator lamp illuminates green in the Lock-mode, and
it goes off in the Auto-mode.
195
4