manualshive.com logo in svg

Saia Burgess Controls PCD7.D412DTPF, Руководство пользователя, Страница: 25 / 73

Поделиться
Скачать
Saia Burgess Controls PCD7.D412DTPF Скачать руководство пользователя страница 25

Saia-Burgess Controls AG

Manual PCD7.D412DTPF & PCD7.D4xxxT5F │ Document 27-620 – Release ENG07 │ 2019-06-20

3-13

Logic Controller

Firmware version

3

3.3 

Firmware version

The firmware of the programmable panel is stored on an SD card soldered to the 

motherboard. A firmware update can be applied by downloading a new version 

with the PG5. When doing so, pay attention to the following procedure:

 

●

Open 

www.sbc-support.com

 and download the latest firmware version

 

● Establish a connection between PG5 and the CPU, the same way as when 

downloading an application (in accordance with the available devices, serial 

with PGU cable, modem

1)

, USB, Ethernet).

 

● In the Tools menu, select "Update Firmware” and use the Browse function to 

select the path for the file with the new firmware version. Make sure that only 

one file is selected for download.

 

● Start the download.

1)

   see chapter “"3.1.2.2  PCD7.F121S Serial interface module RS-232 

 

suitable for modem connection" on page 3-8”

Содержание PCD7.D412DTPF










































































Отзывы:

Нет отзывов