Sagi 101L Series Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 80

Sagi 101L Series Скачать руководство пользователя страница 20

20

3410330_GB

UNPACKING

Installation must be carried out by authorised and specialised personnel.

After removing the packaging, ensure the integrity of the equipment and
verify  that  all  the  parts  or  components  are  present  and  that  the
characteristics  and  state  correspond  to  the  specifications  of  the  your
order.
If not, please inform the retailer immediately.

Remove pvc protective film from all over the appliance.

Attention:

all the packing material must be disposed of in accordance with the

prevailing regulations in the country where the equipment is used and in any
case must not be dispersed into the environment.

POSITIONING

The appliance must be installed and tested in full compliance with accident-prevention
regulations contained in national law and current guidelines. Installers are to comply with
any current local regulations.

▪

Place the appliance onto the required

working site.

▪

Avoid locations with exposure to direct sunlight.

▪

Do not place the appliance in hot, poorly-ventilated rooms.

▪

Do not place the refrigerated compartment near heat sources.

▪

Leave a min. 100-mm clearance around the

appliance on the sides where air inlet and
outlet are located.

▪

Level the appliance by means of adjustable feet.

WARNING: If the appliance is not properly levelled the
performance and condensate drain may be hampered.

«
...
18
19
20
21
22
...
»

Содержание 101L Series

















































































Отзывы:

Нет отзывов