eir fibre box User Manual
Sagemcom Broadband SAS document. Reproduction and disclosure prohibited
Page 58
A.7
Resetting factory configuration
If you lose your password or if, after having entered new parameters in your gateway, you cannot access
the Internet nor the HTTP configuration tool, you can restore the normal operation with the "factory"
parameters via the
Restore Default
procedure.
When the procedure is finished you will have to enter again your connection ID and connection password
delivered by your Internet Service Provider (see
Internet Connection
- section 3.5).
To reset the default settings and therefore restore the gateway to its factory configuration, use one of the
following methods:
This operation deletes the entire personalised configuration of your gateway:
Password, Configuration, customized wireless settings, etc.
After a factory configuration reset, it is
necessary to install your gateway again
,
or to enter again the xDSL connection data supplied by your
I
nternet
S
ervice
P
rovider (ISP) (see Internet Connection section 3.5).
•
In the graphical User Interface (http://10.0.0.138), select
Gateway Settings > Maintenance >
Resets> Reset
.
Important
