Sage Smart Kettle SKE825, Быстрое руководство

Страница: 7 / 48

7
EN
OPERATING YOUR SAGE
®
PRODUCT
BEFORE FIRST USE
Remove and safely discard any packaging material
or promotional labels attached to your kettle. It is
recommended that before first use to fill the kettle
to the maximum level, bring to the boil by selecting
the BOIL 100° button, then discard the water.
OPERATION OF YOUR KETTLE
1.
Fill with the desired amount of water.
NOTE
Always fill the kettle between the minimum
(500ml) and maximum (1700ml) marks
on the water window.
2.
Ensure the lid is closed and locked firmly
into place. Position the kettle securely onto
the power base. Insert the power plug into
a 230/240 power outlet and switch on.
NOTE
If the START / CANCEL button is pressed
(before selecting a temperature button),
the START / CANCEL button surround
will illuminate in red and the 100° button
surround will illuminate and the kettle will
start heating.
3.
Select the desired temperature. The
selected button and the START / CANCEL
button surround will illuminate in white.
4.
Press the START / CANCEL button. Do
not remove the kettle from the power base
during operation. Ensure the kettle has
switched off after the water has boiled or
the selected temperature has been reached
before removing the kettle from the power
base. If the kettle is removed from the power
base during the KEEP WARM function the
kettle will automatically switch off.
5.
When the kettle has heated the water to the
selected temperature, 3 beeps will sound.
6.
If the KEEP WARM function has been
selected, the KEEP WARM button surround
will remain illuminated in red, the selected
temperature button surround will remain
illuminated in white, and the kettle will
maintain the desired setting for 20 minutes.
SAFETY BOIL DRY PROTECTION
The kettle is fitted with a safety device, which
protects against overheating should the appliance
be operated with insufficient water. If this occurs
the kettle will stop heating. Switch Off at the power
point and allow kettle to cool before refilling.
The safety device will automatically reset when
the kettle has cooled down.
Always switch off at the power outlet and unplug
the appliance from the power outlet before cleaning.
REMOVABLE FILTER
The Smart Kettle
™
features a removable mesh
filter to remove scale deposits for cleaner water.
To clean the scale deposits from the filter,
remove the filter by opening the lid and sliding
the filter up and out of the kettle.
The filter can be cleaned by placing under
running hot water and rubbing with a cleaning
cloth or brush. To replace the filter, simply slide
the filter down into the slot behind the spout
of the kettle and push back into position.
NOTE
The filter could become damaged with
time, so please check regularly and
replace if found damaged.