SAFWAY Huennebeck MANTO G3, Руководство пользователя, Страница: 116 / 224

116
Tying
Unless stated otherwise, all dimensions are given in mm.
9.4.3 Using the MANTO Taper Tie
The MANTO Taper Tie can be used with the conventional tying system, however due to
the dimensions of the component, several factors must be taken into account, such as
the maximum and minimum wall thickness possible and the protruding end of the rod.
Ø 22 Ø 19
254 482 254
990
Minimum: 452 75 X X 75
Protruding end of tie rod
Wall thickness [mm] X [mm]
200 181
240 161
250 156
300 131
350 106
360 101
400 81
450 56
Example for a 300 mm thick wall:
X = Total length - wall thickness - 2 x (MANTO Tie Nut MANTO panel thickness)
X = (990 - 300 - 2 x (75 + 140)) / 2
X = (990 - 300 - 2 x (214)) / 2
X = (990 - 300 - 428) / 2
X = 262 / 2
X = 130 mm
9.5 FU Tightener and Edge Tie Fastener MR
The FU Tightener and the Punched Steel Tape are an alternative solution for tying
through, e.g. when panels are used for foundations.
The Safe Working Load (N) of the Edge Tie Fastener MR is 10.00 kN and of the FU
Tightener is 12.00 kN. This lead to a maximum distance between ties of 1.75 m when
used in a 0.90 m high formwork structure.
The Edge Tie Fastener MR can be placed anywhere along the edge profile of the panel.
The tie fastener connects the Tie Rod to the edge profile of the MANTO panel.