background image

AA1069 Dancer Control Card

for DC Controllers

Saftronics, Inc.

5580 Enterprise Pkwy., Ft. Myers, Fl 33905
Telephone: (941) 693-7200
Fax: (941) 693-2431
www.saftronics.com

DOC. NO.  027-1069

REV 2 09/01

WARNING!

Saftronics manufactures component parts that can be used in a wide
variety of industrial applications. The selection and application of
Saftronics products remains the responsibility of the equipment de-
signer or end user. 

Saftronics accepts no responsibility for how it’s

products may be incorporated into the final design.

Under no circumstances should any 

Saftronics product be incorpo-

rated into any product or design as the exclusive or sole safety con-
trol. Without exception, all controls should be designed to dynami-
cally fault detect and fail safe under all circumstances. All products
designed to incorporate a component part manufactured by
Saftronics, must be supplied to the end user with appropriate warn-
ings and instructions as to the safe use and operation. Any warnings
provided by 

Saftronics must be passed through to the end user.

Saftronics offers an express warranty only as to the quality of it’s
products to conform to the catalog specifications. NO OTHER WAR-
RANTY, EXPRESS OR IMPLIED, IS OFFERED. 

Saftronics assumes

no liability for any personal injury, property damage, losses or claims,
arising out of the mis-application of it’s products.

www.saftronics.com

StockCheck.com

Содержание AA1069

















Отзывы: