7/45
1. INTRODUCTION
This document contains the operating rules of the SAFT Lithium-Ion battery unit model for
Stationary Batteries 9 modules 504V max with limitation at 486V P/N 777308-00.
1.1. Applicability
This document describes functionalities and behaviour implemented in the BMM software
version
0.65 revH.
1.2. Acronyms
Acronym
Definition
Application
BMM
Equipment connected to the battery and consuming current from or feeding current to the battery
Battery Module Management
BMU
CAN
Battery Management Unit
Controlled Area Network
EDU
Electro-technical Device Unit
EMS
EOL
HMI
HVIL
Energy Management System
End Of Life
Human to Machine Interface
High Voltage Interlock Loop
I/O
Input / output signal
IMD
Maximum current allowed in discharge
IMR
Maximum current allowed in charge
Li-ion
Lithium Ion
MBMM
Master Battery Monitoring Module
N/A
N/U
PBIT
PoffBIT
P/N
Not Applicable
Not Used
Power on Built In self Test
Power off Built In self Test
Part Number
SMU
Safety Monitoring Unit
SOC
State Of Charge (Battery)
SOH
State Of Health (Battery)
TBC
To Be Confirmed