Safran MorphoAccess SIGMA Series Скачать руководство пользователя страница 474 | Manualshive

Страница: 474 / 517

Safran MorphoAccess SIGMA Series Скачать руководство пользователя страница 474

MorphoAccess® SIGMA Series - Administrator Guide

Compatibility with an Access Control System

2017_2000025464-v03

This document and the information therein are the property of Morpho. They must not

be copied or communicated to a third party without the prior authorization of Morpho

474

July 17

Ethernet port

Protocol selection

The administrator can configure the terminal to send the access control result messages via an
Ethernet link. The protocol could be one of UDP/TCP and TLS/SSL.

MorphoAccess® SIGMA Family terminal is able to send message to two different distant system:
one preferred host (host # 1) and one alternative host (host #2).

Parameter name

Value

Description

remote_msg_ip_conf.host_1_
protocol

or

remote_msg_ip_conf.host_2_
protocol

0, 1 or 2

The administrator can set a protocol type that
will be used for communicating with remote
controller host 1, by using this parameter.

Set to “0”, for using TCP protocol for
communication

Set to “1”, for using UDP protocol for
communication

Set to “2”, for using TLS/SSL over TCP for
communication

For details on configuration of other parameters that help in managing the process of sending
remote message to access controller, please refer to MorphoAccess® 5G Series – Parameters
Guide.

For details about SSL protocol, please refer to SSL Solution for MorphoAccess® document.

Wi-Fi™ Channel

The administrator can configure the terminal to send the access control result messages via a
wireless Wi-Fi™ b/g connection, instead of Ethernet connection. Please refer to “

Network Configuration

Wi-Fi™ Network Configuration” section for more information.

The message format and the protocols supported are the same as for the Ethernet channel:
UDP, or TCP or SSL.

WARNING: The terminal cannot be connected through Ethernet and through Wi-Fi™,

simultaneously.

«
...
472
473
474
475
476
...
»

Содержание MorphoAccess SIGMA Series






































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов