Safran MorphoAccess SIGMA Series Скачать руководство пользователя страница 383 | Manualshive

Страница: 383 / 517

Safran MorphoAccess SIGMA Series Скачать руководство пользователя страница 383

MorphoAccess® SIGMA Series - Administrator Guide

Access Control by Authentication

2017_2000025464-v03

This document and the information therein are the property of Morpho. They must not

be copied or communicated to a third party without the prior authorization of Morpho

383

July 17

Activation key



The administrator needs to select the Card Type, such that it can accommodate User ID.
This must be ensured at the time of user enrolment.



The administrator needs to correctly configure the User Record Reference parameter
by using Terminal Menu or Webserver. The value should be such that authentication
mode is chosen via ‘card’. Please refer to “

User Enrolment in Database

” (Step: 37).



If no PIN check and no biometric check are required for a given user, it is best to provide
him with a Visitor card. For more details, please refer to “Encode Visitor Card”

User Interface

The authentication process starts when the user presents his contactless card to terminal. As
shown below:

To provide his identity, the user presents his personal identity card that contains the User ID.
This action starts the authentication process.

Figure 331:

Authentication without biometric check and with User ID check in card

The authentication process succeeds if the user’s identifier is found. Otherwise, the
authentication process fails.

The result of the authentication process is notified to the user by an audio signal, as described
in Terminal States section.

Upon completion of the authentication process (irrespective of the outcome), the terminal
automatically reverts to the initial state, wherein it waits for a card detection.

Contactless card area

«
...
381
382
383
384
385
...
»

Содержание MorphoAccess SIGMA Series






































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов