Safran MorphoAccess SIGMA Series Скачать руководство пользователя страница 378 | Manualshive

Страница: 378 / 517

Safran MorphoAccess SIGMA Series Скачать руководство пользователя страница 378

MorphoAccess® SIGMA Series - Administrator Guide

Access Control by Authentication

2017_2000025464-v03

This document and the information therein are the property of Morpho. They must not

be copied or communicated to a third party without the prior authorization of Morpho

378

July 17

Authentication with local database: ID input from Wiegand
or Clock & Data

Description

This mode requires an external card reader that will send the User ID to authenticate to the
MorphoAccess® SIGMA Family terminal through Wiegand or Clock & Data input.

The default screen invites the user to pass his badge so the external reader sends the User ID to the
terminal’s Wiegand or Clock & Data input. If the ID exists in the database, the terminal performs an
authentication using the biometric templates associated to this ID.

If the authentication is successful, the terminal triggers the access or returns the User ID to the
Central Access Controller.

Once the user authentication is done, terminal automatically loops back and waits for a new
input ID. If the identifier sent by the reader is not present in the local database, authentication
is not launched.

Activation key

The activation of this mode is controlled by following parameter:

Parameter name

Value

Description

ucc.trigger_event

1 to 15

Use  this  parameter  to  enable  finger,
contactless,  keypad  and  external  port
trigger. Only when external port trigger
is  enabled,  the  terminal  would  receive
trigger from Wiegand or Clock & Data.



Set ‘8’ to enable External Port

Note: Set Trigger Event through
“Configure Trigger Events” through
Terminal.

wiegand.external_port_input_type

0 or 1

Storing current external port input type
as:



Set ‘0’ for Wiegand format input
(default)



Set ‘1’ for Clock & Data format
input

wiegand.external_port_output_status 0, 1 or 2

To enable/disable Wiegand output
functionality.

«
...
376
377
378
379
380
...
»

Содержание MorphoAccess SIGMA Series






































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов