Safran MorphoAccess SIGMA Series Скачать руководство пользователя страница 315 | Manualshive

Страница: 315 / 517

Safran MorphoAccess SIGMA Series Скачать руководство пользователя страница 315

MorphoAccess® SIGMA Series - Administrator Guide

Terminal Configuration through Webserver

2017_2000025464-v03

This document and the information therein are the property of Morpho. They must not

be copied or communicated to a third party without the prior authorization of Morpho

315

July 17

User Enrollment in Database

This feature of MorphoAccess® SIGMA Family Series terminal allows an administrator to enroll
new users in the terminal. The user information such as name, biometric data (i.e. fingerprint),
User ID and PIN, access rights, etc. are entered and stored in the terminal database.

Terminal will allow access to the user by comparing the data provided by the user at access
request, against the data provided by the user at the time of enrollment.

Access Path

User Management > User Enrollment > Enrollment mode > DB Only

Pre-requisites



If terminal is in Legacy L1 mode, then enrolment of users can be done only if Secure
Admin station is equipped with a MorphoSmart™ MSO biometric sensor



The data of the users enrolled in MA5G mode cannot be exported in L1 systems

Screens & Steps

Figure 293:

Adding user information

1.

Enter User Identifier (User ID). Numeric value up to 24 digits.

NOTE:



Wiegand protocol for User ID doesn't support special characters such as "*" and
"#", then is not recommended to insert these characters in the User ID value.



There is a configuration key, misc.user_id_edit, to make user ID field read only.
With this parameter, the user id can be extracted from the Smartcard and restrict
user to edit this field. misc.user_id_edit is accessible from PC application or Web
Server.

2.

Under Enrolment Information screen, an administrator need to enter several
parameters:

«
...
313
314
315
316
317
...
»

Содержание MorphoAccess SIGMA Series






































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов