SafeWaze 022-11029, Руководство пользователя

Страница: 15 / 20

V1.0 2023 Copyright Safewaze
Should the 10’ Tech Tripod be exposed to the force of a fall, or shows damage consistent with the effects of a fall, it must be IMMEDIATELY removed from service
and tagged “Unusable.” Equipment must then be disposed of (Section 20).
16.0 AFTER A FALL
FIGURE 13 - PERIMETER WARNING LINE
Page 12
Only Safewaze, or entities authorized in writing by Safewaze, may make repairs to Safewaze fall protection equipment.
Remove the Confined Space System from use if inspection reveals an unsafe or defective condition. If unsafe or defective condition is found, dispose of the
component(s) as recommended in Section 20.
Use a dry cloth or brush and clean devices. The Tech Tripod can be cleaned with water and a mild soap solution. Allow components to air dry. DO NOT use heat.
Never store any component when wet.
Store Safewaze Confined Space system components in a cool, dry, and clean environment out of direct sunlight. Utilize the storage bag and component pockets
to neatly store the tripod and components. Avoid areas where chemical vapors may exist. Thoroughly inspect the system after any period of extended storage.
17.0 MAINTENANCE AND SERVICE
The 10’ Tech Tripod must be inspected prior to each use and at least annually by a Competent Person other than the user. Inspect the tech tripod for absence or
illegibility of markings or damaged components that may affect the correct function of the tripod. Inspect for any damage to tech tripod components such as sharp
edges, cracks, deformation, excessive corrosion, chemical exposure, missing or damaged detent pins, or unauthorized alteration or modification to the tripod.
18.0 INSPECTION
In addition to inspection prior to each use, the 10’ Tech Tripod must be inspected annually by a Competent Person other than the user. Severe or harsh
environments may require more frequent inspections.
See Figure 14 for more information regarding inspection frequency requirements.
18.1 INSPECTION FREQUENCY