SafeWaze 022-11029, Руководство пользователя, Страница: 12 / 20

V1.0 2023 Copyright Safewaze
Page 9
FIGURE 8 - TRENCH USE
3-Way System, Personnel Winch, Material Winch:
Step 1: The Universal Tripod Bracket is designed to allow quick connection and disconnection of up to 3 Safewaze Devices to the 10’ Tech Tripod. One
section of the bracket (fixture plate) comes pre-installed onto the tripod leg, with the second component (device bracket) pre-attached to the device.
NOTE: Although pre-installed onto a leg of the tripod, the fixture plate can be adjusted in height and orientation by loosening the lock nuts on the
back of the fixture plate and sliding the plate up or down the green section, or rotating to the inside or outside, of the tripod leg. With the plate in the
selected location on the tripod leg, re-tighten the lock nuts to 15 ft-lb. Do not over tighten. The bracket can also be moved from one tripod leg to
another if necessary, and may be oriented on the inside or outside of the tripod leg, based on jobsite parameters or user preference.
Step 2: Remove the detent pin from the fixture plate and position the device with the lifeline oriented towards the top of the tripod and the device bracket hooks
facing down (Figure 10, Step 1).
Step 3: Place the device bracket inside the fixture plate, ensuring the device bracket hooks are properly seated onto the crossbar of the fixture plate. With the
device hooks securely seated on the crossbar, rotate the device upwards until holes in both sections of the bracket are realigned. Re-install the detent
pin through the aligned holes (Figure 10, Step 2). The device lifeline can now be routed through appropriate rigging at the head unit (Figure 10).
15.0 COMPATIBLE DEVICES/CONNECTION POINTS
FIGURE 9 - UNIVERSAL BRACKET/DEVICE CONNECTION
Device Installation
(Outside of Tripod Leg)
Device Installation
(Inside of Tripod Leg)
Device
Device
Bracket
Tripod
Leg
Device Bracket
Hooks
Fixture Plate
Detent Pin
Step 1
Device
Device
Bracket
Tripod
Leg
Fixture Plate
Detent
Pin
Step 2
ANSI Z359.14-2021, ANSI Z359.4-2013
OSHA 1910.140, OSHA 1910.66
OSHA 1926.502
470-00145
3-WAY SELF RETRACTING
LANYARD
3-WAY SELF RETRACTING
LANYARD
ANSI Z359.14-2021, ANSI Z359.4-2013
OSHA 1910.140, OSHA 1910.66
OSHA 1926.502
470-00145
3-WAY SELF RETRACTING
LANYARD
3-WAY SELF RETRACTING
LANYARD
30kN
15kN 15kN
PU
SH TO OPE
N
De
vi
ce
W
ork
A
re
a
Rigging
*Carabiner (FS1015) and
pulley (020-11025) can be sold
separately if expanding system
with additional devices.
PU SH TO OP EN
PU
SH TO OP
EN
30kN
15kN 15kN
30kN
15kN 15kN
ANSI
Z35
9.14
-202
1, A NSI
Z35
9.4-
2013
OS
HA 191
0.14
0, O
SH
A 19
10. 66
OSHA
192
6.50 2 470
-001 45
3-W
AY SELF RETRACTING
LANY
ARD
3-W
AY SELF RETRACTING
LANY
ARD
DANGER WORK ZONE
DANGER WORK ZONE DANGER WORK ZONE
Leading Edge