background image

             DO NOT OVER TENSION SCREWS AS THIS WILL RESULT IN THREAD STRIPPING, TAB / STRUCTURAL 
             DAMAGE,  CRACKING OR BURRING.
             Maximum user 

per TempLink is one (1).

TempLink 3000

 anchors 

must not

 be used for rope access (abseiling).

TempLink 3000

 

anchors 

must not 

be used as part of any static line system.

             SafetyLink’s 

TempLink 3000

 should only be used in a 0- 30 degrees roof pitch range as live loading may trigger the 

             energy absorbing capabilities.

             If any doubt exists as to the strength of the structure or roof sheets an engineer should make the assessment. 
             All safety procedures must be complied with in accordance with the current legislation and regulations. Ensure safety 
             at all times by being attached to anchor point approved safety equipment, using a scaffold or a secured ladder.

Inspect your TempLink is safe before each use (see Maintenance).
Use log inside these instructions for six monthly inspection records (download available from website).
Inspect the “Remove from service” date on product, the shelf life of this product does not exceed 10 years.

The 

TEMPLINK 3000

 is designed as a temporary anchor only and should not be left unattended or exposed to 

             the elements for prolonged periods of time. 

It is recommended that the 

TempLink 3000

 

be uninstalled when not in use and stored in its bag in a safe, clean and dry 

             environment free from chemicals and UV light. 

Installation must be carried out by, or under the supervision of a competent person.

             

Users of fall arrest equipment and all people undertaking tasks associated with harness based work at heights shall be 
trained and assessed in accordance with the requirements set out in  AS/NZS 1891.4:2009:2.2.11 Training and

             competency. 

SafetyLink Pty Ltd

1300 789 545  |  +61 249 641 068

[email protected]

www.safetylink.com

Complies with Australian and New Zealand Standards

SafetyLink’s patented TempLink 3000 is designed to absorb energy when a fall is arrested, 

minimising damage to the structure and reducing the risk of personal injury.

 

 

 

   

 

 

 

 

 

 

 

 

  

 

  

 

 

 

 

 

 

 

 

 

READ ENTIRE INSTRUCTIONS BEFORE INSTALLING ANY SAFETYLINK PRODUCT.

ALL PRODUCTS MUST BE INSTALLED IN ACCORDANCE WITH SAFETYLINK’S INSTALLATION HANDBOOK.

FAILURE TO FOLLOW ALL WARNINGS AND INSTRUCTIONS MAY RESULT IN A SERIOUS INJURY OR DEATH.

IF YOU ARE UNCERTAIN AND NEED HELP PLEASE CONTACT SAFETYLINK.

WARNING: READ CAREFULLY SOMEONES’ LIFE DEPENDS ON IT.

®

METAL ROOF

TILED ROOF

Version: 10.17

TEMPLINK Installation Manual Rev 1 30.10.2020

Содержание TempLink 3000

Страница 1: ... not be left unattended or exposed to the elements for prolonged periods of time It is recommended that the TempLink 3000 be uninstalled when not in use and stored in its bag in a safe clean and dry environment free from chemicals and UV light Installation must be carried out by or under the supervision of a competent person Users of fall arrest equipment and all people undertaking tasks associate...

Страница 2: ...uctions Inspect the cable and tabs joining position for signs of wear Inspect the remove from service date on product the shelf life of this product does not exceed 10 years The TEMPLINK 3000 anchor point has one energy absorbing stainless steel component If this energy absorbing region is expanded distorted this will indicate the anchor point has arrested a fall and should be removed from service...

Страница 3: ...six 6 screws Size 14 g 10 TPI x 65 Hex Head Screws Screw through each tab and existing hole securing to the batten under the roof sheeting DO NOT OVER TENSION SCREWS AS THIS WILL RESULT IN THREAD STRIPPING TAB STRUCTURAL DAMAGE 4 Ensure the screws are the correct length to engage the batten to eliminate over passing the thread into the blank part of the screw Screws must penetrate timber batten by...

Страница 4: ...ection shall be withdrawn from service immediately and a replacement obtained if necessary A label indicating the condition or defect should be attached to the equipment and it should be examined by a competent person who will decide whether the equipment is to be destroyed or repaired if necessary and returned to service In the latter case details of any repair shall be documented and a copy give...

Отзывы: