Rear Panel
1
LAN Port
(RJ45)
Connection for the POE Smart Switch
IP camera hub. The Smart Switch
MUST
be connected to
the LAN port. This port can be used to connect a laptop
to configure the NVR.
Default IP address:
10.100.100.1/24
2
WAN Port
(RJ45)
Connection for optional network
accessories.
Default IP address:
192.168.1.100/24
3
IPC Ports
Connections for up to 16 network IP cameras.
4
Panel Port
Connection for optional CP4-series monitors.
5
VGA Port
Connection for optional monitor.
6
Diagnostic Port
Service Technician use only
.
7
GPS Antenna Port
Connection for the external
antenna for the internal GPS module.
8
WiFi Antenna Connector
(SMA)
Connection to an
external antenna for the internal WiFi module.
9
Cellular Antenna Connector
(SMA)
Under
Development
.
10
USB Port
Connection for optional USB accessories.
11
Sensor Port
Connection for the Alarm Extender.
12
Serial Port
Connection for the I/O Hub.
13
eSATA Port
Connection for optional external
equipment.
14
Power Port
Connection for the main power harness.
5
OBSERVER
™
4816 HVR HARDWARE USER GUIDE
