Safety Vision 48 Series, Руководство пользователя

Страница: 17 / 24

48 SERIES IP CAMERA 15
Modify IP Address
1. Connect the PC to the NVR’s Ethernet LAN RJ-45 port with a standard
Ethernet cable.
2. Ensure the NVR and PC are receiving power and have started up.
3. Run Quick Configuration Tool .
4. Click IP to modify the IP address, click Search Setting , and the system will
display the Setting dialog box.
5.
Set the device network segment, login user name and password, and
then click
OK
.
6. Select the camera IP addresses’ that need to be modified and click Batch
Modify IP . The system will display the Modify IP Address dialog box.
7.
Set the mode as
Static
, and enter the planned start IP, subnet mask and
gateway.
NOTE:
Set the mode as DHCP when there is DHCP server in the network, the
device will automatically acquire IP address from the DHCP server.
8. Click OK to complete device configuration.