Safety Vision 48 Series, Руководство пользователя

Страница: 16 / 24

48 SERIES IP CAMERA 14
Configuration
The 48 series camera can be configured through the
Quick Configuration
Tool
software which must be accessed with a PC. The camera will need to be
configured if it is the first time the camera is used or if it has been restored to
factory default settings.
Camera Initialization
1. Connect the PC to the NVR’s Ethernet LAN RJ-45 port with a standard
Ethernet cable.
2. Ensure the NVR and PC are receiving power and have started up.
3.
Run
Quick Configuration Tool
.
4. Click IP to modify the IP address, click Search Setting , and the system will
display the Setting dialog box.
5. Set the device network segment, login user name and password, and
then click
OK .
6.
Select the cameras
which need
configuration and
click
Initialization .
The system will
display the
Device
Initialization window
will appear.
7. Click Initialization ,
the system will begin
to configure the
camera.
8. Click OK to complete
device configuration.