Installa'on and Opera'ng Instruc'ons
2431 Galpin Court, Suite 140, Chanhassen, MN 55317
800-‐594-‐9165
Tools Required:
Difficulty Level: Intermediate
•
(1) 3/4” Wrenches or Sockets
•
(2) 9/16” Wrenches or Sockets
•
Cordless Drill (opIonal)
•
Phillips Screw Driver
Screen Kit (Op'onal):
•
11/32” Wrench or Socket
The HydroSweep Pro is designed to help preserve your waterfront and control algae, trash, and decaying debris on the
surface of the water, while maintaining naturally occurring aquaIc life. For opImal results, the HydroSweep Pro should
be posiIoned twelve inches (12”) off the floor of your waterfront and posiIoned level (see page 3). SeYng the pump
too close to the boZom of the body of water may have an adverse impact on the shoreline and aquaIc life, which may
be illegal in some jurisdicIons including Minnesota. You should check with your local ordinances regarding any
limitaIons on use. Upon start-‐up of the HydroSweep Pro, the water may iniIally appear dirty since debris, silt, and
sediment are being moved from the boZom of the body of water. This should seZle in Ime.
THERE IS A SERIOUS RISK OF ELECTRIC SHOCK IF THE
HYDROSWEEP PRO IS NOT PROPERLY ASSEMBLED, HANDLED OR
INSTALLED. WE RECOMMEND THAT YOU USE A LICENSED
ELECTRICIAN. THE UNIT MUST BE CONNECTED TO A GFCI (15 OR
20 AMP) CIRCUIT.
PLEASE READ AND FOLLOW THESE INSTRUCTIONS CAREFULLY
(SEE ADDITIONAL PRODUCT WARNINGS ON THE LAST PAGE)
Inspect the HydroSweep Pro for damage immediately upon
delivery. IF THE PRODUCT IS DAMAGED, STOP: DO NOT USE A
DAMAGED PRODUCT. Report any damage to your dealer.
