Safeplace IMPACT C, Техническое руководство и руководство для портативного устройства

Страница: 21 / 34

21
• Safe clock is not initialized. Use the Handheld
Unit to initialize it. (INIT. SAFE DATA)
• The locking bolt won’t eject all the way to lock.
Make sure the door is properly closed and
nothing stops the bolt from moving smoothly.
Check the lock assembly. Check connection of
lock assembly to the electronic board.
• The locking bolt won’t reject all the way to open.
Press the door to release any pressure on the
bolt.
• Not enough digits were entered for locking.
Enter a complete number. If this happens
during override procedure, it means the safe
does not recognize the override unit. Check the
connectors with the unit.
• Wrong master card. Locate the correct card.
• Locking bolt is in middle position. Perform
override procedure.
• Override procedure was not completed. Start
from the beginning.
• Safe has performed an illegal operation. Check
the safe motor and then perform override
procedure.
Trouble-Shooting for Magna 500