SafeNet Sentinel, Руководство разработчика

Страница: 199 / 282

Programming Sentinel Keys using Sentinel Keys Toolkit
Sentinel Hardware Keys Developer’s Guide 181
instance of a feature can be included (you will note that radio buttons
are provided against feature instances). If your distributor requires
licenses with different values (depending on the customer require-
ments), you will need to add a new instance and send the updated
group file to the distributor. Your distributor can receive the group
file, using the distributor key shipped with the earlier group.
3. Click the Program Distributor Key tab.
4. Select metering setting for your distributor:
❑
Non-metered
Unlimited number of Sentinel Keys can be programmed by your
distributor.
❑ Metered
Specify a value between 1 to 65535. The metering count will be
decremented by one for each license programmed.
5. Specify a File Encryption Key (FEK). Make sure that you do NOT spec-
ify same FEK for every distributor.
You must make a note of this down somewhere so that, if required,
you can send updated group files to your distributors without pro-
gramming a new distributor key. You may also copy the FEK to clip-
board, by clicking the
(Paste FEK to clipboard) icon.
6. Specify a Cheat Counter value that you want your distributors to pro-
gram in the non-RTC Sentinel Keys.
7. Attach a single distributor key you purchased from SafeNet to your
USB port/hub (it is not same as developer key or Sentinel Key).
8. Click Make Distributor Key .
9. Specify a path to write the group file ( .lgx ) for your distributor.