Available users and default codes
When supplied by Safelock Systems, locks are setup so
that ID 01 is assigned a Manager profile with a code which
is valid to open the lock immediately.
As supplied by Safelock Systems Limited:
ID
Profile
(ID) Default Code
00
Master
(0-0)-1-2-3-4-5-6-7-8
01
Manager
(0-1)-1-2-3-4-5-6
02-29
Users
Deleted
– Can be added by the
Master or Manager
Warning:
Default codes must be changed immediately.
The Master has overall administrative control of the lock
system and therefore can
create other users who can
open the lock
.
User hierarchy
As supplied by Safelock Systems:
User permissions
Profile
Permission
Master
•
Full control of the lock and other users
•
Cannot open directly
Manager
•
Open lock, Change own code
•
Manage users (Add, delete, disable,
enable, reset)
•
Manage time delay values
•
Activate PC link for audit
•
Set date and time
•
Turn backlit buttons and keypad beeps
off or on
•
Override time delay (If profiled)
User
•
Open lock, Change own code
•
Override time delay (If profiled)
•
Activate PC link for audit (If profiled)
Code length
The Master code always contains ID 00 + 8-digits. Other
user codes contain the 2-digit ID + 6-digits by default but
can be changed so that 6-9 digits are used.
Buttons
Key
Use
To use commands (Hash #)
To confirm a command (Enter)
Master (00)
Manager (01)
Users (02-29)
LA GARD 702
High Security Lock for Safes & Vaults
Standard
User Instructions
Keypad firmware 1.1.0.2, Lock firmware 1.1.5.7 (v1)
