Before You Begin, You Will Need
• Your Liberty Safelert Sensor (two AA batteries included)
• Computer, tablet or smart phone with wireless capability
• 15-20 minutes to complete the setup of your Safelert Sensor
• A credit card
• Your home wireless (Wi-Fi) router name and password (write them
in the space provided)
Router Name_____________________
Password________________________
Quick Start Guide- Start Here
1
Install the batteries into your Safelert Sensor install the batteries
and wait for the LED light to turn solid RED (refer to “Detaching
the Backplate from the Cover” and “Installing the Batteries”
sections).
2
Locate the white identify (ID) button located on the top right corner
of your Safelert Sensor.
Note: By brushing your finger across the face of your
Safelert Sensor, you can easily feel the ID button
that protrudes above the surface of the cover.
3
Press and hold the ID button until the LED light flashes YELLOW,
then release the button.
NOTE: This may take 10 to 15 seconds.
The light may change colors and/or turn off before
flashing YELLOW.
4
Go to the wireless (Wi-Fi) settings of your computer, tablet or smart
phone. Ensure that the wireless (Wi-Fi) is enabled and search for
available wireless networks. Select and connect to the wireless
(Wi-Fi) network named
Elertus.
5
Open an internet browser on your computer, tablet or smart phone.
In the address line of your browser type:
10.5.5.2
and press
enter.
6
Follow the onscreen instructions to finish the setup of your Safelert
Sensor.
NOTE: Have your wireless (Wi-Fi) router name and
password available for this step of the setup.
Additional Product And Installation Information
Visit us on the web for product information, installation video in
-
structions, and Frequently Asked Questions.
https://libertysafe.elertus.com/install
ID Button
Detaching The Backplate From The Cover
Locate the small slot on the left side of your Safelert Sensor’s cover. Using
a small, flathead screwdriver, gently press in and pry the cover out and away
from the backplate.
Installing The Batteries
Install two AA 1.5V alkaline or lithium batteries into the battery holder. Pay
attention to the polarity labels (POS + and NEG -), on the battery holder.
IMPORTANT! Do not install the batteries in the wrong
polarity.
What Do The LED Lights Mean?
Your Safelert Sensor has different colored LED lights to help you during the
set up process. The following defines the different colors.
Solid GREEN. Your Safelert Sensor is connected to the Safelert servers and
is functioning properly.
• The solid GREEN light will turn off after 30 minutes to conserve
battery life.
• One (1) Velcro Attachment Once the GREEN light is off, pressing the
white ID button will cause the LED to turn on for 1 minute.
Solid RED. Your Safelert Sensor is NOT connected to the Elertus website.
• The solid RED light will turn off 30 minutes after an unsuccessful
set-up attempt.
• Once the RED light is off, pressing the white ID button will
cause the LED to turn on for 1 minute.
Flashing YELLOW. Your Safelert Sensor is in “Setup” mode. It will remain in
this mode for up to 15 minutes or until the setup is complete (see step 3 of the
Quick Start Guide).
Installing Your Safelert Sensor Into Your Safe
Locate the Velcro adhesive strip (included). On the backplate of your
Safelert Sensor you will find a flat area. Remove the plastic backing on one
side of the Velcro strip and press the sticky surface onto the back of your
Safelert Sensor.
Features
The Liberty Safelert Sensor can now connect you to the things you value
most. Safelert monitors the temperature inside your safe and alerts you
if the temperatures rise above or below thresholds you set. You can also
track the humidity levels inside your safe and get alerts when your safe
door is opened or closed. Safelert will also send you an alert if your safe
is jostled or moved. Alerts are sent through your existing Wi-Fi wireless
router. Alerts are sent from your safe and received by Safelert servers.
You can choose whether to receive the alert by email, text or smart phone
application. Safelert provides an additional level of security that helps keep
your valuables safe. The world’s best safe just got smarter.
Important Safety Instructions
IMPORTANT! Improper use or installation of this device can result
in LOSS OF/DAMAGE TO PROPERTY.
IMPORTANT! You must operate this device in accordance with the
instructions and specification in this Quick Start Set-Up Guide.
IMPORTANT! Using this product in any manner other than
outlined in this document voids your warranty. Also, Elertus is NOT
responsible or otherwise liable in any way for any damage resulting
from the misuse of this product. See the section of this document
entitled WARRANTY for details.
What Is Included
• One (1) Safelert Device
• One (1) External Antenna
• Two (2) AA Batteries
• One (1) Safelert Warning Label
• One (1) Velcro Attachment
• One (1) Set-Up Guide (This Document)
Open your safe and locate a suitable position for your Safelert Sensor in
the upper right corner. Placing your Safelert Sensor near your safe door on
the right side will ensure that your Safelert Sensor will send you accurate
alerts. Remove the remaining plastic backing on the Velcro strip and press
your Safelert Sensor to the wall of your safe.
Installing The Optional Antenna
If you do not receive an alert when the safe door is closed, attach the
external antenna (included). The optional antenna extends the range of
your Safelert Sensor. To install the optional antenna, locate the connec
-
tor on the upper left corner of your Safelert Sensor’s cover. (See figure 1).
Press the antenna cable into the connector until you hear a click. Extend
the antenna from your Safelert Sensor inside your safe to the outside of
your safe. Remove the backing from the adhesive located on the backside
of the antenna and attach to the outside of your safe.
Web Application Overview
To Sign In:
http://libertysafe.elertus.com
Getting There
Open a web browser on your computer, tablet or smart phone. In the address
line of your browser type: libertysafe.elertus.com (http://libertysafe.elertus.
com). Sign In to your Liberty Safelert account using the Username and
Password you selected during the installation process.
Status Page (Home)
Your Safelert Sensor status page contains the name of your safe and your
Safelert Sensor’s status as last reported. Here you can check the current
temperature and humidity of your safe, whether the door is open or closed
and whether movement has been detected. You can also check the current
state of your Safelert Sensor’s batteries.
Navigation
• STATUS – this tab returns you to your status page (Home). You
can also return to your status page at any time by clicking on the
Liberty Safelert logo.
Antenna
Connector
Liberty Safelert
Setup Guide