Safegate Group safedock, Руководство пользователя

Страница: 91 / 348

SAFEDOCK®

Safegate Group
Manual Date: 6 February 2015
Chapter: 3A Operating Procedures Version: 2.7
Page 3 of 30
The following description covers both the local control procedures of Safedock and
the optional operation of Safedock on commands from Superior System.
For security reasons some Safedock systems are configured with a password feature
for the authorisation of commands. For more information,
see Chapter 4A Stand
Configuration Utility.
1. LOCAL START OF DOCKING
– REGULAR CONDITIONS
1.1 AIRCRAFT DOCKING ACTIVATION
Description Position
Aircraft docking activation is performed at the Operator Panel. When the
Safedock system is ready to operate, the panel will show:
SAFEDOCK
SYSTEM followed by a status message. If the status is READY , the
docking procedure can be initiated by pressing the Start Dock key. A
START DOCKING message appears, followed by the option SELECT
AIRCRAFT .
Instructions to Operators:

Determine aircraft for docking:
o
Press the desired aircraft type key.
o
Press the exact sub-type key, if required (press left-right
arrows to show all listed sub-types).
Note: If operator passwords are enabled, enter the 4-digit password to
continue the aircraft docking activation with the help of the 0-9 digits on
the switch cover.
Gate area: Empty
(The aircraft is on the ground
en route to gate).
Image
Operator Panel
Image Pilot Display
T1-42 T2-18 T2S-24 T3-9 T3-15
System Idle menu
Start Docking menu
Test
SAFEDOCK SYSTEM
READY
Park
On Start
Dock
A 320 A 330 A 343 A 321
START DOCKING
SELECT AIRCRAFT:
A 300 A 310 A 318 A 319 A 306
6 8 9 0 7
ENTER PASSWORD:
- - - -
<Aircraft type>
1 3 4 5 2