Safegate Group safedock, Руководство пользователя

Страница: 203 / 348

SAFEDOCK®

Safegate Group
Manual Date: 6 February 2015
Chapter: 4A Stand Configuration Utility Version: 2.7
Page 17 of 26
4.8 AIRCRAFT
Here you can configure the centrelines, stop-positions and Operation Panel menu
layout.
FIGURE 4A.11
– AIRCRAFT FEATURE
On the left is where the centrelines and stop-positions are shown. The middle part
displays the properties for the currently selected aircraft. On the right, the list of
available aircrafts and generic aircrafts is displayed.

Centrelines: The system supports up to three centrelines, depending on the used
license.

Stop Positions: A visual representation of the different configured stop-
positions on the currently selected centreline. The icon represents the
selected stop-position reference.

Add Stop Position: Enter a name and a distance for a new stop-position, then
press one of the three stop reference-buttons to add the new stop-position.

Delta Move: Opens a dialog window where you enter a distance to which all
stop-positions will be adjusted by. Negative values will decrease the distance
to stop-position and positive values will increase it.

Aircraft Menu: The aircraft selection menu, as it will appear on the Operator Panel
(within the unit
’s capabilities).

Aircrafts: The list of available aircraft profiles.

Generics: The list of generic aircraft profiles created by a user.