Safegate Group safedock, Руководство пользователя

Страница: 192 / 348

SAFEDOCK®

Safegate Group
Manual Date: 6 February 2015
Chapter: 4A Stand Configuration Utility Version: 2.7
Page 6 of 26
4.2 SYSTEM CONFIGURATION
SMT comes with a series of features that can be adjusted to your needs. The
availability of these features depends on both the version of the Safedock system and
also the license in use.
You must apply the configuration to the system after changing the type of scanner
being used, otherwise the system calibration will be invalid; this is indicated by the
yellow icon on the left side.
FIGURE 4A.5 - SMT
– SYSTEM CONFIGURATION
Some settings may display a confirmation dialog asking you to accept changing the
setting. This is done to prevent accidental activation/deactivation of a feature that may
have a negative impact on other features in the system.
4.2.1 System Information

Stand name: This setting specifies the name of the stand, and will be reported to
the Superior System.

Program version: Shows the version of the software that wrote the currently used
configuration template, whether loaded from disk or directly from a system.