Safegate Group safedock, Руководство пользователя

Страница: 191 / 348

SAFEDOCK®

Safegate Group
Manual Date: 6 February 2015
Chapter: 4A Stand Configuration Utility Version: 2.7
Page 5 of 26
4. SOFTWARE DESCRIPTION
4.1 CONNECTION
SMT can connect using either a serial line or a network connection. To connect, click
the right-arrow to open the connection settings, select/enter information as required
and press the “Connect” button. Network adresses can be entered either as DNS-
names (if such are available) or IP-numbers (only IPv4 is supported).
FIGURE 4A.3 - CONNECTION FEATURE
4.1.1 Creating a New Configuration/ Opening an Existing Configuration
To create or open a configuration, use one of the following ways

Connect to a Safedock system to download a configuration.

Open an existing configuration using the
“File / Load” menu.

Create a new configuration using the
“File / New” menu. Using this option you will
also need to select the template to use for schematics in the new configuration.
You need to have a configuration open to access most parts of the application. Some
parts will be disabled when not connected to a Safedock system.
When connecting to a system without an existing configuration, a dialog will appear
that prompts for a selection of one of the possible actions.
FIGURE 4A.4
– CONFIGURATION DOWNLOAD SCREEN