SAFE-DOCK
TM
Replacement Harness Instructions
Please Read All Instructions Before Beginning the Installation.
Tool Needed:
Phillips Screwdriver
Step 5
At Least Monthly...
Inspect Safe-Dock for damage
Check all fasteners for tightness to ensure safety
Clean Safe-Dock with mild detergent and a damp cloth
Step 4
Step 1
Prop shopping cart gate into
its raised position as shown
using a screwdriver or piece of
wood.
Step 2
Step 3
SAFESTRAP.COM
800.356.7796 973.442.4623 [email protected]
Find the two screws that se-
cure the harness to the Safe-
Dock. Remove the screws
and the metal plate. Do the
same on the other side.
Keep the screws and metal
plates for attaching the re-
placement harness.
Pull the old harness through
the holes in the Safe-Dock.
Discard.
Insert one end of the replace-
ment harness into the harness
receiving slot.
Lay the replacement harness out on the Safe-Dock.
The red release button should point towards the
handle of the shopping cart.
•
Tighten all 4 screws.
Secure by inserting the metal
plate into the harness’s end
loop. Do the same on the other
side.
•
Secure the metal plate
to the Safe-Dock using the
screws from Step 1.
•
Repeat on other side.
rev: 2016/01-cjf
©
Copyright 2016 Safe-Strap Company, LLC. All rights reserved.
