RVS Systems
Reverse With Confidence
™
20
21
MONIT
OR
B
RIGHTNESS
Backup Camera Display And Manual Brightness Adjustment
After installation, place the vehicle in reverse and the backup camera
image will automatically display on the monitor. Once this image is
displayed, you can manually adjust the monitors’ brightness by press-
ing the center button. The brightness can be adjusted from 10 to 100.
The OSD menu will disappear after 5 seconds of inactivity.
Auto Brightness Adjustment
Your system will automatically adjust monitor brightness based on
ambient light. The monitor will be comfortably visable in both bright
sunshine and the darkness of night.
•
Do a hard reset, unplug all cables
and power cables, leave out for 1
minute, and re-connect them
•
Check to ensure that the
connection to the camera is tight
•
Verify camera cable is plugged into
port labeled Backup Camera
•
Verify that the green positive
trigger on power harness is set to
power 12v+
•
Verify camera is on correct camera
input
•
Verify cable is connected to
monitor
•
Verify camera is connected to
cable
•
Connect known working camera
and cable to monitor
•
Verify green trigger is receiving
power
No Image On Screen
TROUB
LESHOO
TING
