manualshive.com logo in svg

Safe Fleet FoamPro Accumax II Fury, Инструкция по эксплуатации, установке, калибровке, обслуживанию и каталог запасных частей, Страница: 58 / 108

Поделиться
Скачать
Safe Fleet FoamPro Accumax II Fury Скачать руководство пользователя страница 58

MAX100/200-OPERATION Rev200813

58

Error/Warning Codes Troubleshooting Table

The table is provided to assist in tracking down system problems, it is not meant to take the place of good 

troubleshooting practices.

Accumax Display Controller Errors and Warnings

Code

Message 

Description/Cause

Corrective Actions

E0001

NO DATA

Data cable unplugged.  

Wiring issue.  

Missing CAN network terminator. 

Other hardware not powered or failed.

Check network connections. 

Check/install terminators if missing.  

Contact manufacturer.

E0010

E0011

E0012

SOFTWARE DRIVER FAILED

INTERNAL ERROR

Unit encountered internal error 

Restart unit. 

Check for latest firmware updates. 

Contact manufacturer.

W0020

HIGH TEMP WARNING

High temperature inside of the unit

Unit will operate normally.  

Action will be required if temperature continues 

to rise.

W0021

UNIT TOO HOT!!!

Internal temperature reaching thermal 

shutdown level.

Reduce heat exposure

Accumax Network Assembly Errors and Warnings

E0403

NO INJECTOR

Injector not detected.

Injector not paired. 

Injector not powered. 

Injector cable disconnected. 

Injector hardware issue. 

Pair injector. 

Check wiring and power to injector.

Contact factory.

E0404

NETWORK CONFLICT

Multiple injectors with the same ID on the 

network.

Pair injector. 

E0405

NO LOW-FLOW

Low-Flow hardware not detected.

Low-Flow not paired yet. 

Low-Flow not powered. 

Low-Flow cable disconnected. 

Low-Flow hardware issue. 

Pair Low-Flow. 

Check wiring and power to Low-Flow.

Contact factory.

E0406

NETWORK CONFLICT

Multiple low-flow hardware in the same 

Group on the network.

Pair Low-Flow. 

E0407

NO HYD. CONTROLLER

Hydraulic Controller hardware  

not detected.

Hydraulic Controller not paired. 

Hydraulic Controller not powered.

Hydraulic Controller cable disconnected. 

Hydraulic Controller hardware issue. 

Pair Hydraulic Controller. 

Check wiring and power to Hydraulic 

Controller.

Contact factory.

E0408

NETWORK CONFLICT

Multiple Hydraulic Controllers hardware 

in the same Group on the network.

Pair Hydraulic Controller.

Accumax Injector Assembly Errors and Warnings

E0430

INJ. PRESS. SENSOR

Injector assembly pressure sensor failed  

or disconnected.

Check if sensor is installed and plugged in. 

Check pressure sensor wiring.

Replace pressure sensor. 

E0431

INJ. HARDWARE CAL.

Injector assembly calibration issue. 

Calibration incorrect or not performed.

Recalibrate foam flow on this 

 

injector assembly. 

E0432

INJ. HDW. OVERCURRENT

Injector assembly hardware  

overcurrent detected.

Inspect injector assembly metering valve for 

foreign objects. 

Flush injector. 

Contact factory if issue persists.

E0433

INJ. HDW. ENCODER

Injector assembly hardware issue. 

Position encoder issue.

Injector assembly internal issue  

contact factory.

E0434

INJ. HDW. STALL

Injector assembly motor stall. detected.

Check if injector assembly has sufficient power 

 

to operate.

Reset power.

Check if all cables are securely connected. 

If problem persists, contact factory.

Table 2.  Error/Warning Codes

Содержание FoamPro Accumax II Fury













































































































Отзывы:

Нет отзывов