manualshive.com logo in svg

Safe Fleet FoamPro Accumax II Fury, Инструкция по эксплуатации, установке, калибровке, обслуживанию и каталог запасных частей, Страница: 38 / 108

Поделиться
Скачать
Safe Fleet FoamPro Accumax II Fury Скачать руководство пользователя страница 38

MAX100/200-OPERATION Rev200813

38

9.  USER SETTINGS
Adjusting User Settings

Reset Accumulated Water and Foam Totals

AccuMax hardware components measure and collect consumption data on water and foam. These numbers are 

recorded in an event log each time the system is turned off. These totals are automatically reset at startup. However, they 

can be reset at any time from the menu.

1. Select 

USER SETTINGS

 on the menu screen. Press 

INCREASE 

or 

DECREASE

 button until the user setting 

is selected. Press 

SELECT

 button to access the submenu options.

2.  Select the 

RESET TOTALS

 item from this list. Press 

SELECT

 button to initiate reset.  

3.   Confirm reset by pressing the 

SELECT

 button after the dialog box appears.

Water Valve Preset (MAX200 Fusion model only)

The most frequently used water valve position can be programmed and recalled as a preset. 

Programming Preset in Operator's Screen:

1.  Using the 

SELECT, INCREASE 

or 

DECREASE 

buttons, move the valve to the desired preset position. 

2.  Press and hold the 

INCREASE 

or 

DECREASE 

button for approximately 5 seconds. Current valve position 

will be saved as the new preset.

3.  The preset indicator will move to the new preset value. 

Discharge Name Configuration

The display module can be set to display a custom name to identify the discharge it is used with. This name can 

be selected from a predefined list or a custom name can be created. This name will be displayed in the Header bar in the 

Operator screen.

1.  Select USER SETTINGS on the menu screen by pressing the 

INCREASE 

or 

DECREASE

 button. Press the 

SELECT

 button to access this menu.

2.  Select the NAME menu with the 

INCREASE 

or 

DECREASE

 button and press the 

SELECT

 button to enter 

this menu.

3.  To choose a predefined name, select menu item 'SELECT FROM LIST'. Press the 

SELECT

 button to enter 

names list.  

4.  Select the desired name with the 

INCREASE 

or 

DECREASE

 button and press the 

SELECT

 button change 

the setting. 

5.  To create a custom name from 'NAME' menu, select EDIT NAME. Press 

the 

SELECT

 button to enter 'EDIT NAME' screen. When screen is loaded, 

current name is displayed and highlighted for editing.

6.  If name is highlighted for editing, use the 

SELECT

 button 

to change to the next character at the cursor position. Use  

ON/OFF

 button to select the previous  character in the cursor position. 

Use the 

INCREASE 

or 

DECREASE

 button to move the cursor to the 

next position. Pressing and holding the 

SELECT 

or 

ON/OFF

  buttons 

will cycle through available characters automatically.

Содержание FoamPro Accumax II Fury













































































































Отзывы:

Нет отзывов