SAF OPAL Ethernet IP Interface MS6 SERIES, Руководство пользователя

Страница: 12 / 14

Opal Pro to Mod TCP
Page 12
Relay Status Status of the Relay Outputs
Bit 0 – Running
Bit 1 – By-Pass
Bit 2 – Shorted SCR
Bit 3 – Reverse
1.07 Input Word 9
Bit 4 – Faulted
1.08 Input Word
10 Analog Output Analog Output value in Volts X 100
2.01 Input Word
11 Stack Size Opal Pro Stack Size in Amps
2.02 Input Word
12 Comm
Module Type 0 – None
2 – Ethernet
2.03 Input Word
13 Firmware
Version Opal Pro Firmware Version x 100
10.01 Input Word
14 Start/Stop
Control 4 = 2 Wire
5 = 3 Wire
6 = Comm Module
10.02 Input Word
15 Ramp Time Time is seconds
10.03 Input Word
16 Step Current In % of nameplate current
10.04 Input Word
17 Current
Reference 7 = Internal
8 = Analog Input
9 = Comm Module
10.05 Input Word
18 Phase Angle 10 = Internal
11 = Analog Input
12 = Comm Module
10.06 Input Word
19 Jog Accel
Current Limit In % of nameplate current
10.07 Input Word
20 Jog Current
Limit In % of nameplate current
10.08 Input Word
21 Jog Ramp Time is seconds x 10
11.01 Input Word
22 Stop Mode 13 = Coast
14 = Soft Stop
15 = DC Injection
11.02 Input Word
23 Soft Stop
Step In % of incoming line voltage
11.03 Input Word
24 Soft Stop
Ramp Time in seconds
11.04 Input Word
25 DCI Current In % of nameplate current
11.05 Input Word
26 DCI Time Time in seconds