6.3 Mounting the wear contacts
Use only new wear contacts. Used wear contacts
must not be used.
Danger !
For pad removal, see Chap. 6.1.
Wear contact sets comprise the components as
listed in Chap. 1.2.1.
Note: Mount the longer end of the wear contact
cable (101) into the outer brake pad (12
2
).
6.3.1 Insert the wear sensors of the wear contact
cables (101) into the recess in the brake pads (12)
and press in as far as they will go (see Fig.).
The wear sensors will lock in place.
Insert the brake pads (12) with pre-mounted wear
contact set into the pad shaft (see Fig.) (see also
Chap. 6.2).
Mount the pad retainer (11) with bolt (44), washer
(45) and spring cotter pin (26) (see Fig. and
Chap. 6.2). Ensure the correct position of the wear
indicator cable (101) (see arrows).
6.3.1 - Mounting the wear contacts
6.3.2 - Mounting the brake pads
6.3.3 - Mounting the pad retainer
Replacing the brake pads
25
en
XL-SA40001RM-en-DE Rev A • 02.2016 • Errors and changes excluded © SAF-HOLLAND
