Saey ILDRI 60, Инструкция по установке и эксплуатации, Страница: 52 / 55

S
AEY
INIGO/ILDRI
08112013
– v02
52
ENGLISH
Cleaning the glass
The airwash-system keeps the glass of the appliance clean for a longer period of time. However, blackening of the
window surface cannot be prevented in the long-term. The use of damp or wet wood aggravates this effect.
The window surface can be cleaned as follows:
1.
Place a slightly damp piece of newspaper or rag in the white ashes of the cool appliance and rub this on the glass.
The ashes have a gently scouring effect.
2. Now rub the window surface with another damp piece of newspaper or rag. Finally polish the glass with a clean
dry soft cloth.
There are also special cleaning products for fireplace glass. Be careful with these products because some may damage
the heat resistant paint of the appliance. Follow the instructions of the cleaning product carefully.
By applying the following tips and tricks you can prevent damage to the glass.

Don’t let burning logs pass the log grid.

When filling wood prevent logs from falling against the glass.

Don’t put too much pressure on the glass during cleaning.
If the glass breaks, then please consult your dealer.
Cleaning the fan
The fan sucks air into the convection mantle and consequently dust
also enters. To guarantee the fan working properly, dust should be
removed periodically. The fan can be reached as follows:
1.
Carefully remove the fire-bricks on the left and right
2.
Remove the baffle plate
3.
Carefully remove the remaining fire-bricks and the sealing on the
bottom plate
4.
Unscrew the hex screws in the back wall
ATTENTION
Never use ‘scouring’ cleaning products, they can damage the protective layer of the glass and cause it to crack.