Saey ILDRI 60, Инструкция по установке и эксплуатации, Страница: 51 / 55

S
AEY
INIGO/ILDRI
08112013
– v02
51
ENGLISH
8 M
AINTENANCE
Generally speaking the inset fire should undergo a thorough maintenance at least once a year if the appliance is used
frequently. We recommend carrying out smaller maintenance work such as removing ashes and cleaning the glass at
more regular intervals.
Removing ashes
The few ashes remaining following combustion form a protective layer between the bottom of the appliance and the
fire hearth. You furthermore extract the maximum energy from the fuel with “combustion in the ashes”. You should
thus always retain ± 1cm at the bottom. Ashes removed belong in the rubbish bag.
Cleaning the flue
Flue dust and ashes must be removed from the smoke discharge
duct every year. The smoke discharge duct can be accessed by
removing the baffle plate. This makes it easy to remove the ashes
from the discharge duct as well as the connector. The baffle plate
must remounted correctly afterwards.
Sealings and fire bricks
Sealings and fire bricks are subject to wear and tear and need to be replaced periodically. How often depends on how
much you use your appliance. A principal rule is that the sealing needs replacement when it is flattened, and the door
no longer fits tightly against the front of the appliance. Fire bricks must be replaced when they are worn thin, or when
possible cracks are so wide that you can actually see steel through them.
Movable and mechanical parts (closing mechanisms, hinges etc) should be greased once a year with a heat-resisting
lubricant.
Cleaning painted surfaces
Dust the remaining ashes from the painted parts using a soft hand brush or cotton cloth. Never
wash the appliance with water! This can cause rust.
ATTENTION
The appliance may only be cleaned if it has fully cooled down.