SAEVO EVUS 8, Руководство пользователя

Страница: 107 / 150

10 Working with Images
Basic User Manual 97
− Zoom in/out the image
a. Rotate the function key corresponding to ZOOM and the ROI is displayed on the thumbnail.
b. Use the trackball to position the interest area, and rotate the function key corresponding to ZOOM to zoom
in or out this area.
−
Rotate the function key corresponding to Rotate to rotate the image.
−
Rotate the function key corresponding to Overview to restore the image to the default setting.
−
Make measurements, annotations and body marks.
4. Rotate the function key corresponding to Exit to exit Panoramic Imaging.
10�2 Magnifying an Image
You can magnify an interest region on the imaging area.
NOTE :
The image can also be magnified in the frozen mode.
To magnify an image:
1. Select the
Zoom key on the control panel to enable this feature.
A size multiplier is displayed on the information area of the basic screen, a thumbnail is displayed in the lower
left corner of the basic screen, and the magnified image is displayed on the imaging area of the basic screen.
2. Position the ROI by using the trackball.
3. Rotate the
Angle knob on the control panel to adjust the magnification.
10�3 Freezing an Image
Select the Freeze key on the control panel to capture an image in a real time scan or dual/quad split screen display
and the feature to be applied is also activated. For details, refer to Section 4.1.1 General Settings.
You can select any desired image mode, magnify the image, perform measurements, add annotations and body
marks and adjust imaging parameters in the frozen mode.
10�4 Using Cine
The cine review is available by selecting the Freeze key in the real time scan, and the icon appears on the
screen.
You can review the cine manually or automatically, and can also cut the desired cine segments.
10�4�1 Reviewing Cine
■ To review the cine manually
You can review the cine frame by frame by using the trackball.
Or, select the
Menu key, and select F By F on the pop-up menu. Rotate the Menu key or select the ← or → key to
review the cine frame by frame.
Each image is identified by a number which indicates its position in the cine.
NOTE:
• You can adjust Chroma and GSC parameters when reviewing cine.
• You can select
To First
or
To Last
on the pop-up menu, rotate the Menu key or select the
←
or
→
key to
review the first or last frame.