32
Mode
DRILL
SAW
SHAVER
1,000
5,000
300
RPM
Torque/
Frequency
Gear ratio
Operation
Direction
Irrigation
volume
Program
1 N.cm
10 N.cm
-.-Hz
1:1
3:1
X
Forward
X
Forward
Level 0
Level 0
Level 0
P1
P1
P1
■ Program setting
1. Press the program button ( ) on the control box or program button ( ) on the foot controller to select the program number.
Program number increases each 1 stage in order. The program returns to number 1 (P1) after number 9 (P9).
■ Other function (SETUP)
1. Volume control
Number of icon bar indicates loudness level of sound.
4 stages, set the sound volume by pressing ▼ or ▲ button.
Press the SETUP button ( ) to complete the setting
after setting the level of volume.
- Beep sound shuts off in mute mode.
- The calibration function sets up for all products from the first delivery
or purchasing by the manufacturer. It is recommended to calibrate the
motor before using when the motor is replaced or repaired.
2. After setting the desired value by referring to the operation method, keep pressing memory button ( ) for 3 seconds.
The ‘SAVING’ is displayed on LCD, program is memorized with beep sound.
2. AUTO CALIBRATION
After connecting the angle to the motor, hold the motor by hand tightly.
Step the foot controller fully in order to start the calibration.
Calibration will be completed with beep sound and display “Calibration Completed”.
By stepping foot controller, RPM will be displayed in real time.
By using ▼, ▲ button, determine the initialization.
Choose “NO” with button, the initialization will cancel.
Choose “YES” with button, the initialization will start. Screen will off for 5-10 sec.
And show reset screen with beep sound and message “RESET Completed”.
* Initialized default value
3. Time set
Press the button in TIME SET mode.
Set the current time by using ▼ or ▲ button.
After setting the year, press button and the number of month will blink.
After setting the month, press button and the number of day will blink.
After setting the day, press button and the number of hour will blink.
After setting the hour, press button and the number of minute will blink.
After setting the minute, press button, and all setting for time will be completed.
4. Reset
Press the SETUP button ( ) to enter the setup mode, select the desired setting item by pressing the ◀ or ▶ button.
Press the SETUP button ( ) again at setup mode, return the main screen.
Содержание TRAUS SSG10
