SAESHIN TRAUS SSG10, Руководство пользователя

Страница: 23 / 48

20
1. Motor cord connection
2. Foot controller connection 3. Power cord connection
( O ) ( X )
4. Irrigation tube connection
Please insert the motor plug to the device correctly.
(Place the arrow mark on top. See the picture below.) Please insert the foot controller connector.
Check the hole and pins of foot controller
connector are in place then screw the
connector lock.
Insert the power cord into the main power
inlet of the control box.
connector lock.
- If you do not use it for long period, please open pump roller cover. Otherwise, the irrigation tube might be damaged.
Open the pump roller cover upward.
Close the irrigation pump cover
downward. When close the pump roller cover
make sure that the irrigation tube
is positioned as shown in the figure. Make sure the pump roller cover
is completely closed.
Insert the irrigation tube correctly
into the center of irrigation pump. When insert a tube, place a pump cover
to close the arrow part. Otherwise,
irrigation might not be efficient.
Handpiece connection
A B
C
B-1
D
C-1
Saline connection