SAESHIN TRAUS SSG10, Руководство пользователя

Страница: 19 / 48

LCD WINDOW
1. Irrigation volume display
: It shows selected irrigation level. The level is 0 to 5 (Level 0 = No volume / Level 5 = Maximum volume).
Number of water drop shows the volume level.
2. Program number display
: It shows current set of program number. It display P1 to P9 and can save 9 programs. After restart the device,
it displays program number 1.
3. Gear ratio display (DRILL, SAW mode)
: It shows current set of gear ratio.
4. Operation direction display (DRILL, SHAVER mode)
: It shows the selected rotary direction.
5. RPM display
: It shows the initial setup RPM when it is on standby. The actual value is displayed in real-time during operation.
The number is same as set RPM level when press foot controller to the end.
6. Optic display (Optic version)
: The optic function is working when bulb symbol display on the screen.
* Optic function is only operated with optic angle handpiece.
* When press the speed control pedal on the foot controller after operating the optic function, LED is turned on.
7. Torque / Frequency display (DRILL, SHAVER mode)
- Torque display (DRILL mode): It shows the setup torque value. If an actual load is higher than set torque value,
the set torque value is on the screen and the motor is stopped automatically with ‘E3’ on the screen and beep sound.
- Frequency display (SHAVER mode – F/R repetition motion): It shows the frequency value according to the speed.
8. Foot controller gauge display
: The gauge indicates the degree to which the foot controller is pressed during operation.
9. Torque gauge display (DRILL mode)
: The gauge indicates the actual load value during operation.
10. Mode display
: It shows current selected mode.
11. Motor display
: It shows current selected motor (MOTOR 1 / MOTOR 2).
12. Time display
: It shows current time.
- Be careful that the LCD on the control box could be damaged by impacting or dropping.
16
- Optic function is applied to ‘M2 DRILL mode’ only.
1
2
3
6
11
10
11
12
5 7
4
8 9