background image

INTRODUCTION

This product is 

medical device.

Make sure to read this user manual before using.

This user manual is to assure proper installation and use.

Pay attention to read this user manual in order to making the best use of this product and to assure

the prolonged lifespan before using.

Specially, pay attention the contents with marks such as                    and       

< User >

• Qualified Professional

< Intended purpose >

1) Dental apex locator : It is a dental device that measures the length of the root canal by using changes

    in electrical resistance, etc. and is used to check the location of the tip of the root canal in dental treatment.

2) Electric dental handpiece : A handpiece powered by electric motors to remove teeth, etc.

< Classification of equipment >

• Type of protection against electric shock: ClassⅠ equipment

     - To avoid the risk of electric shock, the product must be connected to a power source with a protective ground.

• Degree of protection against electric shock: Type B applied part  

• Classification according to the degree of protection against ingress of water as detailed in

    the current edition of IEC 60529:

    - Control Box: IPX 0

    - Foot Controller: IPX 1

• Not suitable product in the atmosphere that exist flammable anesthetic mixture with air or with oxygen

• User sterile product (non-sterile product at shipment)

• Classification according to mode of operation: Continuous operation with intermittent loads

• Applied part: Bur, Lip Hook

< Use time >

• Loading time: 3 minutes

• Resting time: 10 minutes

<Operating and storage condition >

1

Operating condition

Transport and Storage condition

Temperature (℃)

Relative humidity (%)

Atmospheric pressure (hPa)

Temperature (℃)

Relative humidity (%)

Atmospheric pressure (hPa)

10 ~ 35

10 ~ 80

700 ~ 1,060

-20 ~ 60

10 ~ 90

500 ~ 1,060

Содержание E-CUBE PLUS





























Отзывы: