23
Recommended separation distances between portable and mobile RF
communications equipment and the E-CUBE-Plus
The E-CUBE-Plus is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled.
The customer or the user of the E-CUBE-Plus can help prevent electromagnetic interference by maintaining a minimum
distance between portable and mobile RF communications equipment (transmitters) and the E-CUBE-Plus as recommended
below, according to the maximum output power of the communications equipment
Rated maximum output
Power of transmitter
(W)
For transmitters rated at a maximum output power not listed above, the recommended separation distance ‘d’ in meters (m) can
be estimated by using the equation applicable to the frequency of the transmitter, where P is the maximum output power rating of
the transmitter in watts (W) according to the transmitter manufacturer.
Note 1: At 80 MHz and 800 MHz, the higher frequency range applies.
Note 2: These specifications may not be applicable in all situations. Electromagnetic propagation is affected by absorption and reflection
from structures, objects and persons.
150 kHz ~ 80 MHz
d = 1.2 √P
Separation distance according to frequency of transmitter (m)
800 MHz ~ 2.7 GHz
d = 2.3 √P
0.01
0.12
0.12
0.23
0.1
0.38
0.38
0.73
1
1.2
1.2
2.3
10
3.8
3.8
7.3
100
12
12
23
80 MHz ~ 800 MHz
d = 1.2 √P
Cables and accessories
Maximum length
Shield
Complies with
Motor cord
Foot controller with cord
AC power cord
1.2 M
1.7 M
1.7 M
Unshielded
Unshielded
Unshielded
RF emissions, CISPR11
Class A / Group 1
Harmonic emissions
IEC 61000-3-2
EN 61000-3-2
Voltage fluctuations / flicker emissions
IEC 61000-3-3
EN 61000-3-3
Electrostatic discharge (ESD)
IEC 61000-4-2
EN 61000-4-2
Electrical fast transient / burst
IEC 61000-4-4
EN 61000-4-4
Surge
IEC 61000-4-5
EN 61000-4-5
Voltage dips, short interruptions
and voltage variations on
power supply input lines
IEC 61000-4-11
EN 61000-4-11
Power frequency (50/60Hz)
magnetic field
IEC 61000-4-8
EN 61000-4-8
Conducted RF
IEC 61000-4-6
EN 61000-4-6
Radiated RF
IEC 61000-4-3
EN 61000-4-3
Description of BASIC SAFETY and ESSENTIAL PERFORMANCE
The E-CUBE-Plus is intended for use in the electromagnetic environment specified above.
The following essential performance of E-CUBE-Plus should be running in such an environment.
1) Frequency of handpiece should be a value between 20 to 30 ㎑.
2) Irrigation volume should be over the 25 ㎖/min during handpiece is operated.
Содержание E-CUBE PLUS
Страница 1: ...INSTRUCTION MANUAL www saeshin com...
