SAESHIN E-CUBE PLUS, Инструкция по эксплуатации

Страница: 13 / 28

11
- Turn off the control box when insert or remove the file.
- Pull out the file to confirm locking it after connecting the file.
- Clean the chuck of angle handpiece at all times. The file can lose its balance or chucking power can
be weakened if there is rust inside of the chuck.
5. Angle Handpiece Connection
: Please insert the angle handpiece to motor until ‘click’ sound after arrange the angle handpiece positioning
pin and motor positioning slot.
To separate the angle handpiece and motor, pull out the angle handpiece to its axis side.
6. File Connection
: Please insert the file into the chuck of angle handpiece until stop the file.
To separate the file and angle handpiece, pull out the file after pushing the button of angle handpiece head.
7. File clip connection
: Insert the file clip to one side of the probe cord.
In APEX mode, connect the file to the file clip.
In APEX + ENDO (combination) mode, connect the file clip
to the connecting cord.
8. Lip hook connection
: Put the lip hook on the other side of the probe cord.
Power cord
Foot controller
Handpiece
Probe cord
Coctrol box
Cable tie
Probe Cord
Connecting Cord