2
Tap on ¨Grinder¨.
2
3
Watch the how to video.
3
Restoring factory settings
The machine offers you the possibility to restore the factory settings at any
moment.
1
Tap the Settings icon.
1
2
Scroll from left to right to select 'Factory settings'. Confirm by tapping the
2
confirmation icon.
- The settings are now restored.
-
The following factory settings are restored to default: water hardness,
standby time, display brightness, sound
, front illumination, profiles, tank
light, measure/units, home screen settings, BeanMaestro preferences, Wi-Fi
credentials, software update preferences, Saeco credentials, Amazon credentials.
AquaClean water filter
Your machine is AquaClean enabled. You can place the AquaClean water filter in
the water tank to preserve the taste of your coffee. It also diminishes the need
for descaling by reducing limescale build-up in your machine. You can purchase
an AquaClean water filter from your local or online retailer or from authorized
service centers.
AquaClean filter status indication
The status of the AquaClean filter is always visible in the 'Status' menu as a
percentage.
- If the status of the AquaClean filter is 10% or less, the screen shows a
-
message for 2 seconds each time you switch on the machine. This message
advises you to buy a new filter.
- If the status of the filter is 0%, the machine asks you to replace the AquaClean
-
filter every time you switch on the machine.
Activating the AquaClean water filter (5 min.)
The machine does not automatically detect that a filter has been placed in the
water tank. Therefore you need to activate each new AquaClean water filter that
you install in the 'Status' menu.
When the machine stops showing the filter activation message, you can still
activate an AquaClean water filter, but you will need to descale the machine first.
Your machine has to be completely limescale-free before you start using the
AquaClean water filter.
Before activating the AquaClean water filter, it has to be prepared by soaking it
in water as described below. If you don't do this, air might be drawn into the
15
