100
ENGLISH
Displayed message
Meaning of the message
CLOSE BEAN
CONTAINER LID
Insert the coff ee bean hopper lid and/or beans lid.
HOT WATER
INSERT
WATER SPOUT
Insert the water dispensing spout to start dispensing. Press "ESC" to exit.
PLACE MILK CARAFE
AND OPEN SPOUT
Before dispensing, insert the milk carafe with the dispensing spout
open.
DESCALE
You need to descale the machine. Follow the steps described in the “Des-
caling” chapter of this manual.
Please note that not descaling your machine will ultimately make it stop
working properly. In this case repair is NOT covered under your warranty.
CHANGE FILTER
The machine needs the “” water fi lter to be replaced.
WATER CIRCUIT
PRIMING
The machine is priming the water circuit. Wait for this operation to be
over.
The red light fl ashes. Press any button to exit the stand-by mode.
RESTART TO SOLVE
Take note of the code (E xx) shown on the display at the bottom.
Turn off the machine. Turn it back on after 30 seconds. Repeat the
procedure 2 or 3 times.
If the machine does not start, contact the Philips SAECO hotline in your
country and quote the code shown on the display. Contact details can
be found in the warranty booklet packed separately or at www.philips.
com/support.
