Sacmi CVS Series, Техническая документация инструкция

Страница: 48 / 68

4 INSTALLATION
4-2
004AZ011B
4.1.3 PART HANDLING
When the crates arrive at the facility, they must be handled with care and transported both inside and outside the
factory with means capable of supporting their weight.
All the parts must be weighed when they arrive on site to verify their exact weight.
The most appropriate methods and systems for lifting the heaviest and bulkiest parts or parts that require special
attention and equipment supplied by SACMI are indicated in the figure.
When lifting the smaller parts and packages, be careful and use the most suitable equipment observing the safety
precautions.
D0003276_00
SAFETY
INSTRUCTIONS
Only specially trained authorized personnel may lift and handle the device.
No one should be near the hanging load or within the range of action of the lift equipment while the electronic
equipment is being lifted and handled.
Follow the instructions for lifting given in the chapter 3 - SAFETY EQUIPMENT AND PRECAUTIONS.
D0003275_00
NOTICE
The manufacturer shall not be held responsible for any personal injury or property damage resulting from failure
to observe current safety standards regarding lifting and handling materials in the user’s facility.