Sacmi CCM001, Руководство пользователя

Страница: 51 / 164

002AZ001A
3 - 1
SAFETY EQUIPMENT AND PRECAUTIONS
3
3 SAFETY EQUIPMENT AND PRECAUTIONS
3.1 SAFETY DEVICES AND GUARDS
E0004P
WARNING!
3.1.1 GENERAL SAFETY RULES
The machine is provided with a number of electrical and/or mechanical safety devices in order to safeguard the
operators and the machine itself.
These devices must never be removed, disabled or altered in any way.
Some illustrations provided in the manual show the machine, or parts of it, with the guards removed. This is simply for
added clarity. Never actually use the machine with the guards removed or safety devices disabled.
Warning signs are provided on the machine to indicate any hazards in the zone where the sign is attached.
Always take all necessary safety precautions before working on the machine.
SACMI shall not be held responsible for any injury to personnel or damage to the machine resulting from failure to
observe these precautions or use the safety devices provided.
3.1.2 SAFETY DEVICES INSTALLED
3.1.2.1 Shutdown devices
The shutdown devices signal any malfunctioning and stop the machine or prevent it from being started up.
3.1.2.2 Indicating a shutdown
Each time a fault arises causing the machine to shut down, this is signalled to the operator by a red flashing beacon
on top of the electrical cabinet.
The cause of the fault which caused the machine to shut down is shown on the display of the control panel.
The fault messages are described in detail in the INSTRUCTIONS B manual.
3.1.2.3 Devices to safeguard the operator
The machine is provided with a number of mobile safety guards which are connected to electrical shutdown devices.
In addition, there are fixed mechanical guards which prevent the operator from coming into contact with moving parts
or other dangerous components such as live or hot parts.